Can Asphalt Patches Fail? A Closer Look At The Causes Of Patch Failure

Can Asphalt Patches Fail? A Closer Look At The Causes Of Patch Failure

Can an asphalt patch fail? Or is it just user error that leads to these problems? In this blog post, Garden State Paving & Seal Coating, LLC will take a closer look at whether or not asphalt patches can fail and the reasons so that you can avoid these issues. So, read on and learn something new!

What is Asphalt Patching?

Asphalt patching involves filling in small cracks or holes in an asphalt surface. It can be an effective way to extend the life of your asphalt surface and prevent further damage.

Types of Asphalt Patching:

Cold Patching:

When the asphalt is mixed at a lower temperature and then applied to the area that needs to be patched, it is called cold patching. Cold patching is typically used for minor repairs.

Hot Patching:

In hot patching, the asphalt is mixed at a higher temperature and then applied to the area that needs to be patched. Hot patching is typically used for larger repairs.

Pothole Patching:

The asphalt is mixed with special pothole patching material and then applied to the pothole that needs repairing.

The Proper Procedure of Asphalt Patching:

Step 1: Cleaning the Surface:

For effective asphalt patching, the first thing you need to do is clean the surface of the asphalt. It is usually done with a power washer or a garden hose.

Step 2: Applying the Patch:

You can apply the patch once the surface is clean. If you are using a cold patch, you will need to compact it into place. However, if you are using a hot patch, you will need to heat the asphalt before applying it.

Step 3: Compacting the Patch:

Once the patch has been applied, the next step is to compact it. It is done with a hand tamper or a gas-powered compactor.

Reasons for an Asphalt Patch Failure:

When the proper procedure for asphalt patching is not followed, it may fail. The following are common reasons for an asphalt patch failure:

Improper Surface Preparation:

One of the most common reasons for an asphalt patch to fail is improper surface preparation. If the surface isn’t cleaned and prepped correctly, the patch won’t have a good foundation. It can cause the patch to crack, crumble, and eventually fall apart.

Lack of Compaction:

Another reason that patches may fail is a lack of compaction. The patch needs to be compacted correctly to hold up over time. If the patch isn’t compacted properly, it can settle and shift, which can cause cracks and other damage.

Poor Quality Materials:

If the materials used to make the patch are of poor quality, it’s more likely that the patch will fail. It’s important to use high-quality, durable materials when patching asphalt. Otherwise, you run the risk of the patch not lasting very long.

Improper Installation:

Finally, another reason that asphalt patches may fail is improper installation. If the patch isn’t installed correctly, it’s more likely to fail. That’s why it’s necessary to hire an expert to do the job. They will know how to install the patch so that it lasts.

Conclusion:

If you require a reliable asphalt paving or seal coating job done in Shamong, NJ, contact Garden State Paving & Seal Coating today. We’ll gladly provide you with a free quote on all our services. Thanks for reading!