Sealcoating your asphalt is a great way to shield and protect the surface of your pavement. It can also help extend the life of your pavement by safeguarding it from UV rays, environmental factors, as well as moisture that might get into cracks. Since sealcoating is an integral part of maintaining asphalt pavement, it is vital that you sealcoat your surfaces correctly so they last for years to come.
In this blog post, we will discuss how to sealcoat your asphalt pavement the right way.
Prep Your Asphalt Pavement First
Preparing your asphalt pavement before sealcoating can make a huge difference. Prep work such as removing oil and grease, dirt, loose particles, or contaminants will help sealcoat adhere to the surface better and shield it from future damage. The sealant will also last longer on clean surfaces because there is less chance of dislodging the sealant.
- Before sealcoating takes place, make sure you clean up as much dirt as possible from hard surfaces such as parking lots, garages, and driveways. It will make the sealcoat more effective.
- If any oil or grease remains on the surface, the sealcoat will not adhere, and it may peel off during the cooling process. This is why you must clean the surface before you seal.
- Remove any loose particles or contaminants so that sealcoating can be applied evenly to all of your asphalt.
Fill Any Cracks
It’s essential to seal cracks before sealcoating because this will prevent water from seeping into your pavement and causing more damage than necessary.
- Using a crack filler is necessary to fill up any tiny gaps created by the traffic driving over them. These are usually caused by slight imperfections in the surface below that are not visible to the naked eye.
- Bigger cracks should be sealed off with asphalt sealer before sealcoating them so water does not seep in and cause more damage.
Consider the Temperature
When sealcoating, it’s crucial to apply sealer in the summer when there is a minimum temperature of 50 degrees. If you notice that the temperature is below 50 degrees, it is best to delay your sealcoating till it is hotter in order to get the best results.
Apply the Sealant
All sealcoating jobs will require both sealant and an applicator. A sealant gun is typically needed for larger surfaces, while a spray bottle can be used to apply sealant on smaller areas. The sealer you use must not contain any oils or waxes because these substances will cause your sealcoat to flake and peel prematurely.
Sealcoating protects against wear and tear, reduces maintenance costs, extends service life, and protects pavements from chemical spills.
If you’re looking for a professional sealcoating service to sealcoat your asphalt pavement, then look no further than Garden State Paving & Seal Coating LLC. Not only do we provide exceptional quality workmanship and a wide variety of services to our customers in Medford, NJ, but we also offer competitive pricing.
Contact us to learn how our asphalt paving service can restore your home’s driveway or commercial parking lot and improve your curb appeal. Get a free quote today!
